| Sizes | 4", 6", 8", 10", 12" |
|---|
The installation of the Hydra-Stop Insta-Valve 250 insertion valve is accomplished through a single circular hole — commonly known as a “tap” — cut under full line pressure into the top of the pipe without the need to ream or sever the pipe. By installing the Insta-Valve 250 right where a control point is needed, you gain a permanent asset allowing system control and maintenance in the same manner as a resilient seated gate valve.
To select your valve, follow the step-by-step guide in “Build Your Valve” below. If the valve size you require is not listed or you need additional help in selecting the correct valve for your project, please call Inside Sales at 708-389-5111.
The Insta-Valve 250 is available in 4″ through 12″ diameters.
Yes. The Insta-Valve 250 can be installed in any position on the pipe.
Yes. The Insta-Valve 250 can be installed on all common types of pipes, including AC, CI, DI and PVC pipe.
Only one small excavation is needed to install the Insta-Valve 250, requiring an excavation size as little 5′ x 5′.
Yes. The Insta-Valve 250 can be installed in as little as one hour. Simply mount the Insta-Valve 250 valve body, make a simple tap with your Hydra-Tapper™ and install your Insta-Valve 250 valve cartridge.
The Insta-Valve 250 seals in three ways: throat gasket, wipe seal and valve paddle. Working together, these seals optimize the sealing characteristics of the Insta-Valve 250, providing the best performance and reliability of any valve insertion technology available today.
Yes, the Insta-Valve 250 is a permanent valve designed to provide years of trouble-free operation.
